Mtb Mondraker Chrono 29 2022

Mtb Mondraker Chrono 29 2022 FRAME: Chrono 29 6061 Xtralite in reinforced aluminum, XC Forward Geometry, 73 mm BSA bottom bracket, reinforced head tube, internally routed HHG cables and cables, 12x148mm Boost rear axle SIZES: S: 395 mm / M: 430mm / L: 470mm / XL: 520mm FORK: RockShox Judy Silver TK 29, 100mm, TurnKey, Solo Air, reinforced head tube, 9x100mm axle, 30mm steel stems, 46mm offset. Settings: 2-stage PopLock compression (open / locked) with remote control, extension, air pressure. HEADSET: Onoff Saturn with head tube head from 1-1 / 8 "to 1-1 / 2", sealed ACB bearings, above 41x30.2x7x45 ° x45 °, below 51.9x40x8x45 ° x45 ° STEM: Onoff Sulfur, aluminum 6061 T6, handlebar diameter 31.8 mm, angle: +/- 7º, length: size S / M: 60 mm, size L: 80 mm, size XL: 90 mm HANDLEBAR: Onoff Sulfur 0.2, double butted 6061 aluminum, height: 4.8mm, width: 740mm, 9º horizontal / backsweep offset, 0º vertical / upsweep offset, 31.8mm handlebar diameter HANDLES: Onoff Diamond, single lock-on, 135mm SEATPOST: Onoff Sulfur 0- R, 6061 T6 aluminum, 3D forged, 27.2mm diameter, 400mm length SEAT: Mondraker XC Series, steel rails FRONT BRAKE: Sram Level, two-piece brake caliper, 160mm monobloc 6-hole brake disc in line central, organic brake pads with steel backplate REAR BRAKE: Sram Level, two-piece brake caliper, 160mm monobloc 6-hole brake disc on centerline, brake pads organic brakes with steel rear plate BRAKE LEVER: Sram Level, lever width adjustment with tools, brake lever with ball bearings RIMS: MDK-XP1 29 TLR, 25mm internal width, tubeless ready, 32 spokes SPOKES: CN round, stainless steel FRONT HUB: Formula DC20LW, 9x100mm, cone bearing, IS 6 holes REAR HUB: Formula MST148S-4SB, Boost 12x148mm, sealed bearings, IS 6 holes, MS freewheel FRONT TIRE: Maxxis Ikon 29x2.20, 60TPI, REAR TIRE clincher : Maxxis Ikon 29x2.20, 60TPI, clincher cranks: Sram SX Eagle, Boost, DUB axle, Direct Mount chainring, size S: 170mm, size M / L / XL: 175mm CHAIN READS: 34T, steel, X-Sync 2 BEARING INNER: Sram DUB BSA, sealed bearings, 73mm CHAIN: Sram SX Eagle, 12-speed, Powerlock REAR DERAILLEUR: Sram SX Eagle, roller bearing clutch type 3, cage lock, long cage, 1x12-speed, 1: 1 X drive SHIFT LEVER: Sram Trigger SX Eagle, 12 speed, activation X 1: 1 CASSETTE: Sram PG-1210, 11-50T, 12 speed HANGER: Mondraker M068 WEIGHT: k. A.